Crisp Solutions UC-515 - Manual (Page 17)

Chapter 3
O
PERATING
UC
OMMAND
UC-515
This chapter shows you how to set up UCommand, how to
automatically configure devices, and how to use advanced
features such as the macros.
Before Using the Learning Function
Before you start configuring your remote control using the
learning function, please heed the following:
•
You can map multiple devices to the same device layer. This
can be very useful; for example, if you wish to control the TV’s
volume using your amplifier, without having to change between
the two device screens. In this case, you learn the regular TV
functions from the TV but the volume functions from the
amplifier remote. In some rare cases, if you assign too many
different remotes to the same device layer, this might fail,
although no corruption of data or other damage will occur.
•
If you are going to configure a different remote control for a
UCommand device button after you have previously
configured the device button for a different remote control, first
delete all the commands for the device button. Refer to Using
the Delete Function on page 16.
•
When using the learning function, you must press each button
within 120 seconds. Otherwise, UCommand will exit learning
mode and return to normal operation mode.