Checking the recorded picture, To stop playback, To begin re-recording – Sony CCD-TR600 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the Recorded Picture
Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the
viewfinder.
(1) While pressing the small green button on the POWER switch, turn it to CAMERA.
(2) Turn STANDBY up.
(3) Press the - (©) side of EDITSEARCH momentarily; the last few seconds of the recorded portion
plays back (Rec Review).
Hold down the - side of EDITSEARCH until the camcorder goes back to the scene you want. The
last recorded portion is played back. To go forward, hold down the + side (Edit Search).
To Stop Playback
Release EDITSEARCH.
To Begin Re-recording
Press START/STOP. Re-recording begins from the point you released EDITSEARCH. Provided you do
not eject the tape, the transition between the last scene you recorded and the next scene you record will
be smooth.
To Monitor the Sound While Viewing the Playback Picture in the Viewfinder
Connect headphones (not supplied) to the Q jack. Play back the tape in VTR mode (p. 16).
14