Inserting a cassette, To eject the cassette, To prevent accidental erasure – Sony CCD-TR600 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a Cassette
Make sure that the power source is installed.
When you want to record in the Hi8 system, use Hi8 video cassette HIB.
(1) While shding the release knob in the direction of the arrow, lift up the lid.
(2) Press EJECT. The cassette compartment automatically lifts up and opens.
(3) Insert a cassette vnth the window facing out.
(4) Close the cassette compartment by pressing the "PUSH" mark on the cassette compartment. The
cassette compartment automatically goes down.
(5) Close the lid.
EJECT
C\
m
a
5'
to
01
a
R>
Q.
4
PDSHl
To Eject the Cassette
While sliding the release knob in the direction of the arrow, lift up the lid of the cassette holder and
press EJECT.
To Prevent Accidental Erasure
Slide the tab on the cassette to expose the red mark. If you try to record with the red mark exposed,
the ® and ± indicators flash in the viewfinder, and you cannot record.
To re-record on this tape, slide the tab back out covering the red mark.