Using alternative power sources, Note on power sources, Using hthise current – Sony CCD-TR600 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Alternative Power Sources
You can choose any of the following power sources for your camcorder battery pack (p. 6), house
current, and 12/24 V car battery. Choose the appropriate power source depending on where you want
to use your camcorder.
Place
Power source
Accessory to be used
Indoors
House current
AC power adaptor
AC-V25A/V25B/V25C/V15 (suppUed),
AC-SIO
Outdoors
Battery pack
Battery pack NP-55 (supplied), NP-80/80D,
NP-77H, NP-68, NP-66H, NP-C65, NP-60D
In the car
12 V or 24 V car battery
DC packDCP-77
Note on power sources
Disconnecting the power source or removing the battery' pack during recording or playback may
damage the inserted tape. If this happens, restore the power supply again immediately.
Using HtHise Current
— For the customers supplied with the AC-V25A/V25BAA25C AC power adapter
(1) Lift up the viewfinder.
(2) Connect the AC power cord to a wall outlet. Connect the bottom of the AC power adaptor to the
battery mounting surface of the camcorder.
(3) Set the selector to VTR (DC OUT).
\
POHBli
/
V
iil
wiiaiiiiiif
18