Connections for playback, Connecting to a tv with video/audio input jacks, If a vcr is already connected to your tv – Sony CCD-TR600 User Manual
Page 15: If your tv or vcr is a monaural type
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections for Playback
You can use this camcorder as a VCR by connecting it directly to your TV for playback. There are some
ways to connect the camcorder to your TV. When monitoring the playback picture by connecting the
camcorder to your TV, we recommend you to use house current for the power source (p. 18).
Connecting to a TV with Video/Audio Input Jacks
Connect the camcorder to the inputs on the TV by using the supplied A/V connecting cable. Set the
TV/VCR selector on the TV to VCR.
If you are going to connect the camacorder using the S video cable [a], you do not need to connect the
yellow (video) plug of the A/V connecting cable [bj.
If a VCR is already connected to your TV
Connect the camcorder to the LINE IN inputs on the VCR by using the A /V connecting cable. Set the
input selector on the VCR to LINE. Set the TV/VCR selector on the TV to VCR.
If your TV or VCR is a monaural type
Connect only the white plug for audio on both the camcorder and the TV or the VCR. With this
connection, the sound is monaural.
To connect a TV or a VCR without Video/Audio input jacks
Use the RFU-95UC RFU adaptor (not supplied).
15