To use the remote commander, Remote control direction, Notes on the remote commander – Sony CCD-TR600 User Manual
Page 51: To watch the demonstration
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Use the Remote Commander
Make sure that the COMMANDER mode is set to ON in the menu System.
Remote Control Direction
Notes on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or illumination.
Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor and the Remote Commander.
• This camcorder works at commander mode VTR 2. The commander modes (1,2 and 3) are used to
distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use
another Sony VCR at commander mode VTR 2, we recommend you change the commander mode or
cover the remote sensor of the VCR with black paper.
To Watch the Demonstration
You can watch a brief demonstration of pictures with special effects.
If the demonstration appeares when you turn on the camcorder for the first time, exit the Demo mode
to use your camcorder.
To enter Demo mode, (1) Eject the cassette and turn the POWER switch to OFF. (2) Turn STANDBY
up. (3) While holding down , turn the POWER switch to CAMERA. Demonstration starts. The
demonstration stops when you insert the cassette.
Note that once you enter Demo mode, this mode is retained as long as the lithium battery is in place.
Therefore, demonstration starts automaticaüy 10 minutes later everytime you turn the POWER switch
to CAMERA, or after you eject the cassette.
To exit Demo mode, (1) Turn the POWER switch to OFF. (2) Turn STANDBY up. (3) While holding
down □, turn the POWER switch to CAMERA.
51