Charging and installing the battery pack, Charging the battery pack, Ac-v25aaf25baf25c – Sony CCD-TR600 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and instédl the battery pack. To charge the
battery pack, use the supplied AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat surface without vibration.
(1) Connect the power cord to a wall outlet.
(2) Align the right side of the battery pack with the line on the AC power adaptor, then slide the
battery pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position
(AC-V25A/V25B/V25C only) and unplug the unit from the wall outlet. Then remove the battery pack
and install it on the camcorder.
AC-V25AAf25BAf25C
AC-VI5