To check the current time – Sony SPP-A60 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To check the current time
1
Press (REMOTE).
The REMOTE lamp lights up.
2
Press®.
You will hear a long confirmation beep,
and then the present day of the week and
the time anounced.
Press (REMOTE) to end operation.
The REMOTE lamp goes off.
• If 2 minutes elapse while performing steps 2 to 5,
the operation is canceled. Try again from step 1.
• When the power is connected, Sunday, 12:00
AM is set and the built-in clock starts operation.
If you press ® to check the current time without
setting the time, a time which is not the current
time will be announced.
• if a power interruption occurs when the back-up
batteries are either exhausted or not installed, the
current time will be erased. In this case, set the
current time again.
I
&
21