Remote operation from a touch-tone phone, I). 0 .(d – Sony SPP-A60 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Operation from a Touch-tone Phone
When the answering machine is turned on
1
Call your phone from a touch-tone phone.
2
While you hear your outgoing message,
press (F) and your ID code.
Example; When your ID code is 48, press
(I).0.(D.
3
You hear a long confirmation beep from
your phone and the outgoing message
stops, if the code is correct.
If there are messages, you will hearths
number of messages announced.
4
Press the control code for the operation
you want within 20 seconds.
The control codes are described in the
next page.
5
To go to the next operation, press the next
control codes within 20 seconds.
6
Hang up when you are finished.
When the answering machine is not
turned on, or if the tape is fuii with
messages
1
Call your phone from a touch-tone phone.
2
After 10 rings, the unit will pick up and you
will hear intermittent beeps.
3
Press (D and your ID code.
4
You hear a long confirmation beep from
your phone.
If there are messages, you will hear the
number of messages announced.
5
Press the control code for the operation
you want within 20 seconds.
6
To go to the next operation, press the next
control code within 20 seconds.
7
Hang up when you are finished.
• n 20 seconds elapse without pressing s
control code, the line will be disconnected.
• If you do not set an ID code, the unit will not
pick up after 10 rings.
§
I
I
p>
I
41