Sony SPP-A60 - Manual (Page 5)

Safety Regulations
INFORMATION
This equipment generates and uses radio
frequency energy and if not installed and
used properly, that is, in strict accordance
with the manufacturer’s instructions, may
cause interference to radio and television
reception. It has been type tested and found
to comply with the limits for a Class B
computing device in accordance with the
specifications in Subpart J of Part 15 of FCC
Rules, which are designed to provide
reasonable protection against such
interference in a residential installation.
However, there is no guarantee that
interference will not occur in a particular
installation, if this equipment does cause
interference to ràdio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
- reorient the receiving antenna
- relocate the equipment with respect to the
receiver
SERVICE REQUIREMENTS_________________
- move the equipment away from the
receiver
- plug the equipment into a different outlet so
that equipment and receiver are on
different branch circuits.
If necessary, the user should consult the
dealer or an experienced radio/television
technician for additional suggestions. The
user may find the following booklet prepared
by the Federal Communications Commission
helpful:
“How to Identify and Resolve Radio-TV
Interference Problems”.
This booklet is available from the U.S.
Government Printing Office, Washington, DC
20402, Stock No.004-000-00345-4.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
If your cordless telephone model should
malfunction, all repairs will be performed by
an authorize Sony Senrice Center. This unit
has been registered within the FCC for direct
connection to the telephone network. Under
the FCC program, no customer is authorized
to repair this unit. This applies to a unit in
and out of warranty. If an unauthorized
IMPORTANT INSTRUCTIONS TO USERS
repair is performed, the registration of the
unit for direct connection to the network will
be null and void. If the unit is still in warranty,
the remainder of the warranty period will also
be null and void. It is responsibility of users
requiring service to report the need for
service to their Sony dealer.
Your cordless telephone has been approved
by the Federal Communications Commission
(FCC) as not being harmful to the telephone
network when connected directly to the
telephone lines. In order to fully comply with
the Rules of the FCC, the following
instructions should be read carefully and
followed completely where applicable;
1. The FCC rules require that all direct
connection to the telephone line must be
made through standard plugs and jacks.
No connection can be made to party lines
or coin lines. Prior to connecting your
device to the lines:
a) Upon request from your telephone
company, you must provide the 14 digit
FCC Registration Number and Ringer
Equivalence Number (REN), both of which
are on a label located on an outer surface
of the device.
b) After the telephone company has Installed
the jack, you can connect your cordless
telephone by inserting the mating plug of
your equipment into this jack.
c) All repairs must be accomplished as
described in the “Service requirements”.