Hyouhaveapnmem – Sony SPP-A60 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HYouHaveaPnMem
For detailed instrutions, see pages indicated in (
Telephone
'4t afft.»«»«»- ^ «
Cauee and remedy
No dial tone
• Check the connection of the telephone line cord.
• The handset battery is weak or completely discharged.
Place the handset on the base unit for charging.
The TALK lamp blinks and an
alarm sounds.
• You are too far from the base unit. Come closer to the
base unit.
• The handset battery is weak. Place the handset on the
base unit for charging. 9
The line is noisy.
• You are too far from the base unit. Come closer to the
base unit.
• Place the base unit away from a noise source.
You are connected to a wrong
number, or not connected at
all, even though you dialed
correctly.
Check the DIAL MODE switch setting. ®
The handset does not ring.
• Set the RING ON/BATT SAVE mode switch to RING
ON. •
• The handset battery may be weak. Place the handset on
the base unit for charging.
• Extend the base unit antenna vertically.
• The digital security code in the base unit is erased. Place
the handset on the base unit. O
Rve short error beeps sound
and the redialing function does
not operate.
• The last number you dialed was more than 32 digits. You
cannot redial. #
• You have erased the last number. %
• You dialed a wrong number.
Five short error beeps sound
and the memory dialing
function does not operate.
• No phone number is programed in the speed dial
location.
Rve short error beeps sound
while programing the phone
numbers for speed dialing.
• The programing is canceled if you do not perform steps
within 20 seconds. Repeat the steps from the beginning.
•
• The programing is canceled if you press a wrong button.
Repeat from the beginning.
Five short error beeps sound
while programing the ID code.
• You pressed a wrong button.
• You tried to set a number which is not between 00-99. 9
Five short error beeps sound
and an intercom call is not
possible.
The signal from the handset to the base unit or from the
base unit to the handset was not received. Come closer to
the base unit.
I
S
ai
f
47