Sony PCM-R500 - Manual (Page 18)

Advanced Playback Operations
Playing Tracks Repeatedly
(Repeat Play)
You can play a specific track or all the tracks on the
tape repeatedly.
REPEAT
Playing all tracks repeatedly
Press REPEAT repeatedly while playing a track until
"REPEAT" appears in the display.
The deck will play all tracks 5 times, then stops.
If the deck detects either of the following during
Repeat Play, it will rewind the tape to its beginning
and start playing again.
— A blank section of 9 seconds or more
— The end of the tape or the end ID
To stop playing all tracks repeatedly
Press REPEAT repeatedly until "REPEAT" disappears.
Note
Repeat Play of all tracks is canceled when you take out the
cassette.
Playing a track repeatedly
Press REPEAT repeatedly while playing the track you
want to repeat until "REPEAT 1" appears in the
display.
The deck plays the current track 5 times and then
stops.
If the deck detects any of the following during Repeat
Play, it will rewind the tape to the start ID of the
current track and starts playing again from that
position.
— The next start ID
— A blank section of 9 seconds or more
— The end of the tape or end ID
— A skip ID with Skip Play activated
To stop playing a track repeatedly
Press REPEAT repeatedly until "REPEAT 1" disappears.
Note
Repeat Play of a single track is canceled when you take out
the cassette.
Playing Tracks Skipping
Specific Portions During
Playback (Skip Play)
Please note that skip IDs (see page 19) must be written
on the tape before you can use Skip Play.
Press SKIP PLAY.
"SKIP PLAY" appears in the display. When the deck
detects a skip ID, it fast-forwards the tape to next start
ID, then resumes playing.
To cancel Skip Play
Press SKIP PLAY.
"SKIP PLAY" disappears.
Note
Skip Play is canceled when you take out the cassette.
18
'