Contec SEH-9450-LAS - Manual (Page 11)

1. Introduction
4
SEH-9450-LAS
Environments
Use this product in the following environment. If used in an unauthorized environment, the board may
overeat, malfunction, or cause a failure.
Operating temperature
0 - 60
°C
Operating humidity
10 - 90%RH (No condensation)
Corrosive gases
None
Floating dust particles
Not to be excessive
Inspection
Inspect the product periodically as follows to use it safely.
- Check that the board has
no dust or foreign matter adhering.
- Check that the bus connector
of the board and its cable have
been plugged correctly.
- The gold-plated leads of the bus connector
have no stain or corrosion.
Storage
When storing this product, keep it in its original packing form.
(1) Put the board in the storage bag.
(2) Wrap it in the packing material, and then put it in the box.
(3) Store the package at room temperature at a place free from direct sunlight, moisture, shock, vibration
magnetism, and static electricity.
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.