Contec SEH-9450-LAS User Manual
Page 66
Advertising
8. BIOS Setup
SEH-9450-LAS
59
Description Choice
IDE HDD Block mode
Block mode is also called block transfer, multiple commands,
or multiple sectors read/write. If your IDE hard drive
supports block mode (most new drives do), select Enabled for
automatic detection of the optimal number of block
read/writes per sector the drive can support.
IDE DMA transfer access
This item allow you to enable or disable the IDE DMA
transfer access.
On-Chip Primary PCI IDE
The integrated peripheral controller contains an IDE
interface with support for two IDE channels. Select
Enabled
to activate each channel separately.
Advertising