Contec SEH-9450-LAS - Manual (Page 97)

8. BIOS Setup
90
SEH-9450-LAS
POST
(hex)
Description
6Ch Reserved
6Dh
Assign resources to all ISA PnP devices.
Auto assign ports to onboard COM ports if the corresponding item in Setup is set to “AUTO”.
6Eh Reserved
6Fh
Initialize floppy controller
Set up floppy related fields in 40:hardware.
70h Reserved
71h Reserved
72h Reserved
73h
(Optional Feature)
Enter AWDFLASH.EXE if :
-AWDFLASH is found in floppy drive.
-ALT+F2 is pressed
74h Reserved
75h
Detect & install all IDE devices: HDD, LS120, ZIP, CDROM…..
76h Reserved
77h
Detect serial ports & parallel ports.
78h Reserved
79h Reserved
7Ah
Detect & install co-processor
7Bh Reserved
7Ch Reserved
7Dh Reserved
7Eh Reserved
7Fh
Switch back to text mode if full screen logo is supported.
-If errors occur, report errors & wait for keys
-If no errors occur or F1 key is pressed to continue:
ŠClear EPA or customization logo.
80h Reserved
81h Reserved
82h
Call chipset power management hook.
Recover the text fond used by EPA logo (not for full screen logo)
If password is set, ask for password.
83h Save all data in stack back to CMOS
84h Initialize ISA PnP boot devices
85h
USB final Initialization
NET PC: Build SYSID structure
Switch screen back to text mode
Set up ACPI table at top of memory.
Invoke ISA adapter ROMs
Assign IRQs to PCI devices
Initialize APM
Clear noise of IRQs.
86h Reserved
87h Reserved
88h Reserved
89h Reserved
90h Reserved
91h Reserved
92h Reserved
93h
Read HDD boot sector information for Trend Anti-Virus code