Contec SEH-9450-LAS - Manual (Page 79)

8. BIOS Setup
72
SEH-9450-LAS
PnP/PCI Configuration Setup
This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a
system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers some very technical items and it
is strongly recommended that only experienced users should make any changes to the default settings.
Figure 8.13. PnP/PCI Configuration Setup
Table 8.14. PCI PnP/PCI Configuration Setup Selections
Description Choices
Init Display First
Initialize the onboard video display before initializing any
other display device on the system. Thus the onboard
display becomes the primary display.