Contec SEH-9450-LAS - Manual (Page 77)

8. BIOS Setup
70
SEH-9450-LAS
Description Choice
Power after PWR-Fail
Select a Power On status by the BIOS setup when power fail
PCI Express WAKE
By default, this field is disabled.
If set Enable to enable On board lan “WOL” function
PCI Express PME
By default, this field is disabled.
For Add on PCI-E Card PME
Wake-Up by PCI card
When Enabled, your can awakens the system from Suspend
mode from LAN/ PCI card event.
Power On by Ring
When set to "Enabled," any activity on the Modem port will
wake up the system from a power saving mode.