System reference, Specification, Table 2.1. functional specifications < 1 / 2 – Contec SEH-9450-LAS User Manual

Page 12

Advertising
background image

2. System Reference

SEH-9450-LAS

5

2. System Reference

Specification

Table 2.1.

Functional Specifications < 1 / 2 >

Type Specifications

Supported CPU

Intel(R) Core Duo / Core

2 Duo (FSB 533 / 667 MHz)

Cache

Built in CPU

Processor socket

Socket M

Memory (Option)

Up to MAX 4G, DDR2 400 / 533 / 667, 200 pin SO-DIMM Socket X 2 *1

Chipset

Intel(R) 945GME+ ICH7M-DH

BIOS

Phoenix AwardBIOS, PnP support

VGA

Built in Intel 945GME,
One Analog RGB D-Sub 15pin connector.
One LVDS (18bit) I/F: (One box-header 30-pins and one box-header 20-pins connectors)
One SDVO I/F (box-header 30-pins connector) *2

Keyboard / Mouse connector

One PS/2 keyboard/Mouse connector (Bundled the 2 in 1 cable)

Serial I/F

One box-header 10-pin connector (RS-232C)
One box-header 10-pin connector (RS-232C/422/485)
Baud rate: 115,200 - 50 bps (programmable)

Parallel I/F

None

On board expansion bus

Mini PCI bus

LAN Port

1000BASE-T/100BASE-TX, Intel 82573E controller, One RJ-45 connector. *3
Wake On LAN support

IDE I/F

One EIDE ports, up to two IDE devices
One box-header 40-pin connector, support Ultra DMA 33/66/100 *4
The CF card slot and it shares with a Slave port.

SATA I/F

Two Serial ATA 1.0 compliant ports

FDD I/F

None

Compact Flash Slot *5

Type I/II x 1, IDE Slave Master port connection, Support booting *6

SSD Socket

None

USB Port

4ch USB2.0 compliant ports, one box-header 10-pin connector that support 2ch,
Two USB type A connectors support 2ch.

RAID

RAID0, RAID1

Audio

AC97 CODEC., One pin-header 10-pin connector for speaker-out, line-in,
microphone-in.

*1 Max. available memory capacity is 3.1GB. (ECC is not support.)

*2 PCI-E X16 SDVO PORT can’t use at same time.

*3 1000 BASE-T is supported with the Windows 2000 and Windows XP.

*4 IDE port cannot support by UltraDMA66/100 mode at the time of CF card use.

*5 This CF card slot do not have the hot-swap function. The card cannot remove from slot and attach to slot at the

time of a power supply ON.

The card may be damaged if a power supply is turned off at the time of card access.

*6 IDE Slave port can support one drive at the time of CF card use.

Advertising