Flash mode, Press the <mode> button, Setting the film speed – Canon MR-14EX User Manual
Page 19: Lcd panel illumination, Press the <-^-> button to illuminate the lcd panel, И ^ 2 )
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Flash Mode
Press the <MODE> button to select the E-TTL (or TTL) autoflash mode or
manual flash mode.
ETTL
Press the
<MODE>
button.
► Pressing the button toggles the flash
mode between ETTL (TTL) and M
ETTL ( TTL 1
M-
0 With a Type-A camera,
ettl
autoflash will be set. With a Type-B camera,
ttl
autoflash will be set.
Setting the Film Speed
The film speed is set automatically according to the film speed set with the camera.
I
LCD Panel Illumination
In low-light, you can illuminate the LCD panel for (è12 ).
Press the
<-^->
button to
illuminate the LCD panel.
► The LCD panel Is illuminated for 12
sec.
• To turn off the illumination, press the
<-A->
button again.
• Pressing any button other than the
<PILOT> and <'A'> buttons will extend
the Illumination time beyond
( и ^ 2 ) .
19