Canon MR-14EX - Manual (Page 59)

FEB (Flash Exposure Bracketing)
Press the
< sei 7SET>
button.
► The MR-14EX’s LCD panel display
will be as shown on the left
5.5
i
4
5
Focus the subject.
► When you press the shutter button
halfway, the icon is displayed on
the viewfinder’s bottom.
Take the picture.
• Check that the 4 and icons are
displayed In the viewfinder before
taking the picture.
Repeat steps 4 to 5 to take the
remaining two bracketed shots.
• After all three bracketed shots are
taken, the FEB setting is cancelled
automatically.
0
1
FEB cannot be used with any flash exposure compensation set with the camera.
• Before taking the picture, make sure that the MR-14EX’s pilot lamp is lit or the
4 icon is displayed In the viewfinder. The □ (single-frame) film advance mode
Is recommended.
• If the flash is not ready, you can still take pictures in the normal AE mode.
When the flash is ready, you can resume taking the bracketed flash shots.
feb and flash exposure compensation can be set together with the MR-14EX.
In this case, the FEB amount will shift according to the flash exposure
compensation amount.
C.Fn-1 can prevent the FEB setting from canceling automatically after the
three bracketed flash shots are taken, (^p.64)
C.Fn-2 can change the sequence of the bracketed flash shots, (^p.64)
59