Canon MR-14EX - Manual (Page 81)

Flash Head Movements
Flash Head Tilt and Swing Movements
To tilt or swing the flash head, just grasp it by hand and tilt and swing it as
desired.
When swinging the flash head inward or outward from the standard position,
refer to the angle position scale (15° Increments) on the side of the flash head.
o • Do not swing or tilt the flash heads beyond the maximum angle. Doing so may
cause the flash head to fall off the flash head mount.
•With the EF 50mm f/2.5 COMPACT MACRO lens, swinging flash head B
outward will have it come into contact with your hand holding the camera grip.
Rotating the Flash Heads on the Mount Ring
Hold down the rotate button.
• Use your fingers to hold down the
button.
Rotate the flash head mount.
► While rotating the flash head mount,
use the scale (15° increments) on the
mount ring as a reference.
Rotating the Mount Ring
Be sure to hold down the release button while rotating the mount ring with
your hand. Let go of the release button at the desired mount ring position.
O If the EOS IX or EOS IX 7/IX Lite is used with the EF 50mm f/2.5 COMPACT
MACRO lens, rotating the mount ring from the reference position will have the
flash head hit the control unit. The flash heads therefore cannot be rotated 180“
In this way.
81