Canon MR-14EX - Manual (Page 84)

Major Specifications
The following specifications are specific to the MT-24EX only. Other
specifications are the same as the MR-14EX’s.
Type....................................... Closeup photography-dedicated, twin-flash unit with built-in wireless
transmission/reception and E-TTL/TTL autoflash control
Configuration..........................Flash head assembly, mount ring, control unit, connecting cords
Flash coverage...................... Approx. 70 deg. vertical, 53 deg. horizontal (Reference position for one flash
head)
Flash head movements......... Relative to reference position
Tilt: 45 deg. upward (22.5 deg. increments)/
45 deg. downward (22.5 deg. increments)
Swing: 60 deg. inward (15 deg. increments)/
30 deg. outward (15 deg. increments)
Mount ring rotation: 50 deg. upward (5 deg. increments)/
30 deg. downward (5 deg. increments)
Maximum Guide No. (^ p.85)..Both flash heads: 24 Single flash head: 26 (at ISO 100 in meters)
Flash ratio control.................. 1:8 -1:1 - 8:1,1/2-stop increments (full-stop increments with C.Fn-8-1),
(Flash heads A:B)
13 steps
Flash distance range............. (1) In normal mode
(with f/2.8 lens and ISO 100) Both flash heads: Approx. 20 mm - 8.6 m/0.8 in - 28.2 ft
Single head: Approx. 20 mm - 9.3 m/0.8 in - 30.5 ft
(2) In hgh-speed sync (FP flash) at 1/320 sec. mode
Both flash heads: Approx. 20 mm - 3.8 m/0.8 in -12.5 ft
Single head: Approx. 20 mm - 4.1 m/0.8 in -13.5 ft
Focusing lamp....................... Duration: Approx. 20 sec.
With C.Fn-9-1, the focusing lamp can be turned on/off by double-clicking the
shutter button halfway.
Wireless transmission range..Indoors: Approx. 20 cm - 8m/0.65 ft - 26.2 ft
Outdoors: Approx. 20 cm - 5 m/0.65 ft -16.4 ft (while pointed at slave front
and center)
Custom Functions (-^p.64,83)..Nine provided (C.Fn-1 to C.Fn-9)
Filter size................................58mm dia. filter attachable to mount ring
Hood..................................... .EF 100mm f/2.8 MACRO USM lens-dedicated Hood ET-67 attachable to
mount ring’s hood mount(w/available light only)
Dimensions............................ Control unit: 74.0 (W) x 125.9 (H) x 97.4 (D) mm
2.9 (W)
X
4.9 (H)
X
3.8 (D) in
Flash heads + mount ring: 235.0 (W) x 90.4 (H) x 49.0 (D) mm
9.2 (W) X 3.5 (H) X 1.9 (D) in
Connecting cord: Approx. 30 cm/11.7 in, 6.6 mm/0.26 in dia.
Weight.................................... 585 g/20.64 oz(lncluding control unit, flash heads, mount ring, and connecting
cords. Excludes batteries.) •
• All specifications are based on Canon’s measuring and testing standards.
• Specifications and external appearance are subject to change without notice.
84