Set the mr-14ex’s flash mode to ettl, Focus and take the picture, Av: aperture-priority ae and e-ttl autofiash – Canon MR-14EX User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Flash with the Camera’s Shooting Modes
Av: Aperture-Priority AE and E-TTL Autofiash
This mode is effective for controlling the depth of field in your flash pictures.
You can also obtain a correct exposure for both the subject and
background. You set the aperture and the camera sets the shutter speed
automatically for the correct exposure of the background. The E-TTL
autoflash system obtains the correct flash exposure based on the aperture
you set.
Av
Set the camera’s shooting mode
to
Av
and set the aperture.
Set the MR-14EX’s flash mode to
ETTL.
Focus and take the picture.
• Check that the 4 icon (flash ready) is
displayed in the viewfinder before
taking the picture.
o • In low-light conditions, the shutter speed will be slow. Use a tripod.
• If you take the picture while the focusing lamp is on, underexposure may
result. Wait until the focusing lamp turns off, then take the picture.
Q If the top shutter speed display blinks, the background will be overexposed. Or If
the slowest shutter speed (30”) display blinks, the background will be
underexposed. In such cases, change the aperture until the shutter speed
display stops blinking..
'........ ..................... ... ..................... ................. ..... .... .......... .........23