Id deselecting the flash tube, Press the <ratio>button, Ok-selecting the flash tube – Canon MR-14EX User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
-'ID deselecting the Flash Tube
By firing only one of the flash tubes or both flash tubes, you can create
shadows and sculptural lighting effects.
* The TTL flash mode must be set.
* If you set the flash mode to M, see page 61.
The flash tube ID is “A” for the left one and "B" for
the right one when you look at the rear of the flash
ring.
Only flash tube A fired. Both flash tubes fired. Only flash tube B fired.
Press the
<
ratio
>button.
► The -:ID and d:- icons will be
displayed.
Press the
< <3 >
or
< O >
button to
select the flash tube(s).
• -:ID Ci:-: ® and will fire.
ii
\>; (3^ will fire.
Clc: ®g) will fire.
54
Advertising