Second-curtain synchronization, Set the shooting mode with the camera, Focus and take the picture – Canon MR-14EX User Manual
Page 40: W» second-curtain synchronization
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Second-Curtain Synchronization
Normally, the flash fires in synchronization with the first shutter curtain when
the shutter is fully open. With second-curtain synchronization, the flash fires
immediately before the second shutter curtain closes at the end of the
exposure.
1
2
Set the shooting mode with the
camera.
Press the < -i- > and <—> buttons
simultaneously to select on
the LCD panel.
► Each time you press the < + > and
<—> buttons simultaneously, the
synchronization mode changes in the
following loop:
— ► a — —
-------- (OFF).---------
Focus and take the picture.
► Check that the 4 icon is displayed in
the viewfinder before taking the
picture.
i
To cancel second-curtain synchronization, press the < + > and <—> buttons
simultaneously to turn off the icon on the LCD panel.
•With the
Rebel G/50QN,
TTL aUtoflash is used with second-curtain
synchronization.
•Second-curtain synchronization does not work with the camera’s O (Full Auto)
shooting mode and Programmed Image Control modes.
40