Focus and take the picture – Canon MR-14EX User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Flash Tube
Focus and take the picture.
• Check that the J icon (flash ready) is
displayed in the viewfinder before
taking the picture.
A flash ratio cannot be set. You can fire both flash tubes at the same output or
fire only one of the flash tubes.
Uniform Modeling Flash
Set C.Fn-4-1 (-^p.64). Then you can press the test firing button to fire a
modeling flash to see the lighting and shadow effects before taking the
picture.
* The modeling flash is fired at 70 Hz for 1 sec.
O To prevent overheating and deterioration of the flash tubes, do not fire the
modeling flash more than 10 times in succession. After 10 times, allow the MR-
14EX to cool for at least 10 minutes.
55