Fe lock, Select a shooting mode with the camera, Focus the subject – Canon MR-14EX User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FE Lock
With Type-A cameras, you can set FE (flash exposure) lock. This is the
flash version of AE lock. With FE lock, you use spot metering to obtain the
correct flash exposure reading for a specific area of the subject.
* The flash mode must be set to ETTL.
1
Select a shooting mode with the
camera.
Focus the subject.
Aim the viewfinder’s spot
metering circle over the area of
the subject to be metered. Then
press the
<FEL>
button on the
camera. FE lock remains in effect
for 16 sec.
►
The MR-14EX fires a preflash to
obtain an exposure reading. The
reading is retained temporarily in
memory.
►
FEL is displayed on the viewfinder
bottom for 0.5 sec.
• You can obtain a new FE lock
reading by pressing the < FEL > button
again.
• To cancel FE lock, wait until 16 sec.
elapse or press the <MODE>, < AF>,
or <[!]> button on the camera.
Focus the subject.
30