Arc Machines 415 WDR - Manual (Page 52)

Model 415
Operation Manual
Preferences can also be used to change the order that they appear on the
screen.
To set preferences select "Edit" and then select "Preferences". A combo
box with the functions that can be changed will appear. Highlight the
function to be changed and select "Edit" (under the box). A dialogue
box with buttons for One Level, Multi-level or Eliminated will appear.
Select the desired button and select OK.
Select "Next" and a combo box will appear showing all the multi-level
and single level functions in the order they appear on a weld schedule.
To change the order, click and drag the function to the desired order
of appearance. Select "Finished".
5.18
CMOS Battery Replacement
1.
Required Equipment
#2 Phillips screw driver
CR2032 battery
Document 45D150143
2.
Procedure
Power off the M415 Power Supply
Using the screwdriver, remove the front and rear top covers
Locate the CMOS battery on the motherboard (Note: the M415 will have either an EP811 or a
SBC84710 motherboard – reference Figures 6 and 7)
CR2032 Battery
Figure 6 EP811 Motherboard
Document No. 740084
Revision N
47