AVer CMS User Manual
Page 133
Advertising
126
Enabling the AutoPan:
Enable/disable the PTZ camera move automatically that is based on the selected camera group preset
position number.
1. In Monitor Mode, Press
button and enter the PTZ camera number.
2. After switch to PTZ camera channel, press
button and the AutoPan screen will appear on
LCD screen.
3. Press the preset position group number button (1-4, 5-8, 9-12, 13-16) and press
button to
start auto pan.
i
The auto pan group can be selected more than one group at the same time.
Advertising