AVer CMS - Manual (Page 157)

150
4.7 Alarm Setting
In the Alarm Setting dialog box, just select and enable the condition for the system to alarm and the
action for the system to perform when an alarm is activated. User can setup a total of 16 different
combinations of alarm settings. Each alarm setting can apply to several DVR servers. Click OK to
accept new setting and Cancel to exit without saving.
4.7.1 To setup an alarm condition
1. Click the Add button to add a new alarm condition.
2. Give the name of this alarm condition.
3. Fill the simply description of this alarm condition in Description column.
4. Apply to the DVR server, click Select DVR. In Select DVR window, select the DVR server and
click Add. To exit and save the setup, click OK.
5. Select the Conditions.
6. Select the Action.(see 4.7.1.1 & 4.7.1.2 & 4.7.1.3 & 4.7.1.4 & 4.7.1.5 & 4.7.1.6 ).
7. Click OK to save the setting. To cancel click Cancel.