AVer CMS - Manual (Page 87)

80
2. In System Controller setting screen, select .
3. In Mode screen, select the . If the current mode is 485-CMS mode already, then
the selection will not show in selection list.
4. Press button to confirm. To cancel the selection, press button. When the
“Complete” message appears on the LCD screen, the mode switch is completed.
5. After mode setting has complete, user need to enter the ID of CMS server in order to
operate the CMS system.
6. Press button on System Controller panel. The LCD screen panel will display the
CMS ID select screen as following shown:
Current
System
Controller
Mode