Dvr setup, 1 to add and remove dvr server, Chapter – AVer CMS User Manual
Page 139
132
4.2
DVR Setup
Display the list of all DVR servers. User may add up to 1000 DVR servers, delete and modify the DVR
setting.
i
To upgrade the CMS to 1000 DVRs, please refer to
4.2.1
To Add and Remove DVR Server
1.
Click Setup.
2.
In the Authorization dialog box, enter the administrator User ID and Password.
3.
Click DVR.
4.
In the DVR Setup section, click Add to insert, Delete to remove and Edit to modify DVR server
setting.
5.
To continue adding a DVR, in the text box, enter the name, IP/Domain, Login User, Password,
Confirm Password of the remote DVR server.
6.
If necessary, fill up the contact information to let the personnel in the CMS side know whom to
get in touch with when an event has occurred.
7.
Select the Video Quality for video display on the CMS system monitor screen. The default value
is Auto. When the video quality is high, user can enable Show POS message box and the POS
message will also display on the CMS system monitor screen.
8.
Set the Storage Path for saving the recorded video data of the selected cameras on the Monitor
screen.
9.
Set the max video recorded storage capacity of this DVR server on the CMS system server.
Enter the value in Quota.
10. In the DVR Setting dialog box, click OK to accept the new setting and Cancel to exit without
saving the new setting.
11. The CMS system will connect to DVR server. If the connecting time takes too long, user can click
Disconnect button to cancel the connect action.