AVer CMS User Manual
Page 38
31
Name
Function
(4) Alarm Info
Display alarm event information which it was defined on DVR server.
User can select priority of alarm event and enter some description in
Memo column, and then click Save button to save the setting.
(5) Remote Backup
Remote Backup is purely for backing up the *.dvr file from the remote
DVR sever(see also
(6) Remote Setup
Change the remote DVR server settings(see also
(7) Remote I/O
To view sensor and relay, also to turn on/off relay on remote DVR. Select
the relay and right click to turn on /off or trigger the relay.
(8) Remote Control
Connect to the remote DVR server and operate the application. Select
the DVR server from the Name drag down list and click the Remote
Control button. To use this feature, make sure the DVR remote server is
enabled. For more details on software usage, please refer to the DVR
user manual.
i
This feature works with NV series v 5.7 above only.
(9 ) Reset Alarm
Clear the DVR server alarm list.
(10) Voice Phone
Enable/disable 2-way audio function. This function allows the CMS and
DVR server to talk via the internet using a microphone. Make sure your
microphone and speakers work before using this function. If the DVR
server Talk to web-client setting is disabled, you will not be able to hear
from the other side
(11) PTZ Control
Control the PTZ camera (see also
).
(12) DVR Info
Display the DVR information that user has select to preview. User can
switch to view different DVR or camera by drag down the Name or
camera list. Phone, Address, Mobile, Email, and Description information
were defined when set up the DVR server.