AVer CMS - Manual (Page 153)

146
4.6.1.2 Add a DVR Server
1. Click button
2. In the Authorization dialog box, enter the administrator User ID and Password
3. Click E-Map button
4. Click Add DVR button and the Add DVR window will show up.
5. Select the DVR server from the Add DVR window and click OK.
6. User may now drag and move the DVR icon to its place on the map.
7. To edit and delete the DVR server on the map, click the DVR server icon and the Edit and
Delete buttons will appear on the Map interface. Click Edit to modify the DVR server (see
4.2.1 #
5~10 ). To delete the DVR server from the map, click the DVR server icon and click Delete.
8. Click OK to accept the new setting and Cancel to exit without saving the new setting.
i The functions of short-cut menu is listing below:
- Add DVR: To add a DVR server on the E-Map.
- Edit DVR: To modify the DVR server.
- Delete DVR: To delete the selected DVR server from the E-Map.
- Change Bitmap: Replace the E-Map with new map. The map file only support *.jpg and
*.bmp.
- Add New map: Add up a New map on current E-Map level.
- Remote EMAP: To view the selected
remote DVR server’s E-map.
- Remote I/O: o view the selected remote DVR server’s I/O status.
- Setup OK: To save the current configuration.
Right-click on the DVR
server icon to call out
the short-curt menu.