5 switching to usb cms mode – AVer CMS User Manual
Page 91
84
4.1.1.5
Switching to USB CMS Mode
When the System Controller is connecting with CMS server through the USB port, the System
Controller mode should be in USB CMS mode in order to operate the CMS system. If the mode is not
USB CMS, please follow the below steps to switch to USB CMS mode.
i
-
The default mode is USB CMS mode
-
The 485 PTZ mode is not supported for CMS system.
-
Please remember to setup the System Controller model as System Controller Pro in
CMS system.
1.
In main menu, press
and select
(system controller setting).
2.
In System Controller setting screen, select
.
3.
In Mode screen, select the
. If the current mode is USB-CMS mode already, then the
selection will not show in selection list.
4.
Press
button to confirm. To cancel the selection, press
button. When the
“Complete” message appears on the LCD screen, the mode switch is completed.
Current System
Controller Mode