AVer CMS User Manual
Page 74
67
without saving the new setting.
Display position: CMS system supports up to 4 monitors, users are allowed to customize
the display position that to decide the Center, Emap, Monitor, or Playback to be displayed on
which monitor screen. Click Detail to select the display screen setting. The new screen
display setting will be effect at next time login.
System Controller
– To configure the parameters that is for communicating with the
System Controller (an optional accessory). Also please refer to
manual of the System Controller. Click Setting to configure system controller.
i
The Model of System Controller must match on the System Controller site.
USB Connection: CMS can connect with System Controller through the USB port.
Follow the below description to enable the connection between CMS server and
System Controller.
Enable
– Mark the check box to enable the System Controller function.
Model
– Select System Controller Pro as the Model.
Upgrade
– To update the firmware of the System Controller. Click Upgrade button
and click Select File button. And then, select the firmware file and click OK. The
upgrade process will start. The upgrade firmware may have more than one file.
Therefore, click OK and locate the firmware file to upgrade another file. When the
upgrade process is done, click Finish to complete.