E-map setup, 1 to set up the e-map – AVer CMS User Manual
Page 149
142
4.6
E-MAP Setup
Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can add a map
on another map. User also may add the DVR icons on the map.
4.6.1
To Set Up the E-Map
1.
Click Setup.
2.
In the Authorization dialog box, enter the administrator User ID and Password.
3.
Click E-Map.
4.
The E-Map interface will show up in assigned monitor if user is using multiple monitors for the
CMS system. If user is using single monitor for the CMS application, the E-Map interface will
show up in front of the CMS application interface. Press Esc or click Center button to switch
back to CMS application interface or press F3 to switch to E-Map interface again.
5.
On the E-Map interface:
-
(1) Map List: list all E-Map and all DVR servers that have been added on the E-Map.
-
(2) Group List: User can create the group to group DVR servers for easy management.
Click
to add new group. Drag the DVR server from Map List window into the group. To
delete the group, click
. Double-click on the DVR server will call out the DVR Watch
window(see also
-
(3) Google Map: Click Google Map to use Google map function to find the location map
that user wanted and saves as an E-Map (see also
). To enable the Google
map function, please refer to
at
-
(4) Cancel: Without saving the setting and exit the E-Map interface.
-
(5) OK: To save the setting and exit the E-Map interface.
-
(6) Add DVR: Add a DVR server icon on the map. (see also
-
(7) Delete: To remove the DVR server
-
(8) Edit: To modify the selected DVR server
-
(9) Add E-Map: Add a new map. The new map is added on the current map as a next
level. (see also
-
(10) Load a map to replace the current map
-
(11) Show the current name and layer of map
-
(12) go back to previous layer of map