AVer CMS - Manual (Page 43)

36
3.4.2 Remote Setup
Remote Setup is configuring DVR server from remote site.
Click the Remote Setup button to call out the DVR server setup window.
i The remote setup contents will be varied that depends on the type of DVR (NV series, SA
series, NX series, EB series, EH series, or EXR series) is monitored.
The following setup contents are NV series. Some of functions may not support on NX series and EB
series.
3.4.2.1 System Setting
In the System Setting window, click Update to accept the new settings, click Exit to exit without saving,
and click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete
recorded data after check box and enter the numbers of days in Days text box.
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days, enable
the Delete event and alarm log after check box and enter the numbers of days in Days text box.
(3) Video Standard
Change and select the proper video system according to your camera video system. If the video
system setting is wrong, the video would appear abnormal.
(4) Attention Please
Check the attentiveness of the person who is monitoring the system. You may set the number of times
the Attention dialog box to appear in a day in Times per day text box.
When this feature is enabled, the Attention dialog box would appear. The person who is monitoring
the system must enter the same number that appears from the left box at the right text box and then
click OK.
(5) AutoScan Period
Set the display time gap from 3 to 10 sec. before it switches to the next camera.