CDI Torque MULTITEST Motorized Loader - Manual (Page 101)

A-5
Accessories
Calibration Accessories
Calibration of the 2000-810-01 Indicator and MULTITEST series
transducers is recommended at least every 1 year.
Component Description Drawer-Cutout
2000-250-02 Calibration stand kit
2000-250-0 Stand
2000-150-01 Transducer mounting block
2000-152-3 3/8" Square drive adaptor 7E
2000-221-0 1-1/4" Square drive adaptor 7E
2000-154-8 1-1/4" - 3/4" Drive reducer 7E
200 in oz - 2000 ft lb arm and weight set
2000-320-0 200 in.oz - 2000 ft-lb weight set
Weights
2500-310-1 0.3 oz Hook (1) 6
2500-310-5 0.5 oz Hook (1) 6
2000-310-2 2 oz Bob (1) 6
2000-310-3 4 oz Bob (1) 6
2000-300-2 1/2 lb Disk (1) 6
2000-300-3 1 lb Disk (2) 6
2000-300-4 2 lb Disk (4) 6
2000-300-5 5 lb Disk (6) 7
2000-300-6 10 lb Block (4)
2000-300-7 20 lb Block (5)
2000-300-8 50 lb Block (8)
*Hangers
2000-301 1/2 lb Weight hanger 7-A
2000-304-0 7.5 lb Weight tray
2000-302-0 15 lb Weight tray
2000-303-0 50 lb Weight tray
*Torque Arms
2500-50-0 2.5" Radius wheel
2000-151-0 5" Radius wheel
2000-152-0 10" Radius butterfly
2000-154-0 40" Calibration arm
Note: * - Part not included on the weight set. To be purchased
separately.