CDI Torque MULTITEST Motorized Loader - Manual (Page 53)

4-9
Using the Multitest Toque Calbration System
Displaying Statistical Analysis on LCD
1. Press STAT.
— The LED display reads:
** STAT**
— The LCD displays reads:
HIT SEND = PRINT - upper line
↑↓ ↑↓ = LIST STAT - lower line
Figure 4-2: Statistical Analysis Display
2. Repeatedly press up or down VALUE to scroll through
the LCD display as shown in Figure 4-3.
Figure 4-3: Value Display
3. Press ENTER to return to measurements mode.