CDI Torque MULTITEST Motorized Loader - Manual (Page 13)

1-1
Introduction
The 2000-810-01 Indicator is a laboratory grade instrument that
provides TORQUE, FORCE and ANGLE of rotation
measurements and set-able alert functions. Although designed
as an integral component of the Motorize Torque Calibrator, it
can also be used independently in many laboratory and
industrial applications. The 2000-810-01 features versatile data
acquisition capabilities including measurement storage,
retrieval, statistical analysis and automatic downloading to the
built-in printer or external printer/computer. A remote computer
COM port is available for PC interfacing.
Used with precision torque/force transducers, the 2000-810-01
provides high speed monitoring of static or dynamic torque,
force or angle inputs. Torque/force transducers, purchased
separately, are available in ranges from 15-200 in oz, to 200-
2000 ft lb, and provide system readings with an accuracy of
0.25%, or better. A special memory chip is built into each
torque/force transducer that identifies its range and maintains
its calibration between any other 2000-810-01 Indicator with an
accuracy of 0.5%. The indicator and its transducers may be
calibrated by using accessory precision bars and certified
weights.
The indicator features a bright red alpha-numeric LED display
for readout of torque in ft lb, in lb, in oz, Nm, dNm, cNm, mkg
and cmkg, or force in ounces, pounds, Newtons, decaNewtons,
kiloponds (kilograms) or grams, depending upon the transducer
in use.
Angle measurement, calibration, statistical analysis and set-up
functions are reported on a 2-line by 16-character 5x8 dot
matrix, backlighted LCD, display. A Torque-Angle mode can be
set up for precision fastener installation monitoring. The 2000-
810-01 uses X4 quadrature logic that takes advantage of
maximum resolution from industry standard bidirectional rotary
encoders.