BoonDocker ARCTIC CAT: M1000 Race Gas User Manual
Page 10
Advertising
Revised 11/18/08
Arctic Cat M-1000 Turbo Installation instructions
Page 10
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
C. Using a 3” hole saw make this first cut as shown in picture.
D. Using a 2 ¼” hole saw make this first cut as shown
E. NOTE: You will have to do additional trimming in the holes to get the muffler to fit, use a die
grinder for this step (see below). You can now fit the muffler inside the foot rest.
3”
1 7/8”
Hole center
hol Center
Be sure to trim here for best fit
Advertising