BoonDocker ARCTIC CAT: M1000 Race Gas User Manual
Page 13
Revised 11/18/08
Arctic Cat M-1000 Turbo Installation instructions
Page 13
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
B. Locate the brass fuel regulator fitting and using a
9/16” socket press the fitting on the stock fuel
regulator using a vise as shown in picture.
C. Thread the 1/8 push to connect 90 into the copper cap
as shown in picture
D. Reinstall the fuel pump in gas tank.
E. Find a flat surface on the fuel tank to mount the bulkhead fitting. Drill a 5/16” hole and
install the bulkhead union in gas tank. Fasten the bulkhead fitting using the provided 5/16
lock nut and ¼” washer tighten using a nut driver. IMPORTANT: Do not over tighten this
fitting it will break.