BoonDocker ARCTIC CAT: M1000 Race Gas - Manual (Page 15)

Revised 11/18/08 Arctic Cat M-1000 Turbo Installation instructions Page 15
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
Step: 9 Intercooler
Parts Needed: Tools Needed:
Intercooler Basic tool set
Rubber bumper with 5/16 studs w/ lock nuts
Intercooler mounting bracket
2.5” x 3” charge tube
5” of 2.5” silicone
1 2.5”x 3” silicone hump hoses
4- #40 hose clamps
30” of 3/16 hose
Factory air temp sensor
Blow off valve
A. Mount ADA temp sensor.
(see control box instructions)
B. Relocate power regulator/CCU as shown.
A. Install 5”x 2 ½” silicon hose to air box.
B. Install 3”x 2 ½” charge tube and 2 ½”
hump hose to air box.