Step 6: muffler – BoonDocker ARCTIC CAT: M1000 Race Gas User Manual
Page 9
Advertising
Revised 11/18/08
Arctic Cat M-1000 Turbo Installation instructions
Page 9
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
Step 6: Muffler
Parts Needed: Tools Needed:
Muffler Basic tool set
5- 8mm x 25mm Allen head bolts 3” hole saw
Spring tab Die grinder
¼” x ½” bolt with lock nut 2 ¼” hole saw
Muffler support with rubber bumper
2- Aluminum rivets
4- Gold exhaust springs
Turbo oil tank assembly
12” of heat tape
A. Using the provided 12” piece of heat tape.
Wrap the plastic wire loom on the coolant line
as shown in picture.
B. Mount the oil tank/ turbo assembly to the sled using the stock exhaust can mounts as
shown in picture
Advertising