Step 3: air box – BoonDocker ARCTIC CAT: M1000 Race Gas User Manual
Page 5
Advertising
Revised 11/18/08
Arctic Cat M-1000 Turbo Installation instructions
Page 5
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
G. With the Airbox installed mark where
the mounting bracket hits the throttle
body cross-support.
H. Drill cross-support at mark using 3/8”
drill bit.
Step 3: Air Box
Parts Needed: Tools Needed:
Airbox Air saw
5/16 x 1” bolt Assembly lube
5/16” lock washer
2-Machined rings with o-rings
B. Reinstall the throttle bodies. Cover the
holes on the throttle bodies to keep from
getting shavings into the throttle bodies.
C. Mark bulk head as shown, and trim.
Mark here with air box installed
Advertising