BoonDocker ARCTIC CAT: M1000 Race Gas - Manual (Page 23)

Revised 11/18/08 Arctic Cat M-1000 Turbo Installation instructions Page 23
www.boondockers.com............................
BoonDocker
..........................................877-522-7805
B. Using the provided ¼ nut bolt and washer.
Fasten the oil catch can as shown in picture
C. Run the 19” piece of ½” hose from the
catch can to the oil tank, no clamps are
needed for this connection.
Step: 15 Charge Tube
Parts Needed: Tools Needed:
Charge tube Basic tool set
2.5” x 2” rubber reducer
2.5” x 3” hump hose
3- #40 hose clamps
#32 hose clamps
40” of Poly line
40” of 3/16 clear tubing
6 zip ties
1/8 npt x 1/8 PTC 90