Dynojet 224/4WD: Installation Guide - Manual (Page 14)

In Ground Model 224 4WD Automotive Dynamometer Installation Guide
C H A P T E R 1
Dynamometer Specifications and Requirements
1-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNAMOMETER SPECIFICATIONS AND REQUIREMENTS
The following specifications and requirements will help you set up your dyno area
and verify you have the requirements necessary to operate your dyno safely.
C HASSIS S PECIFICATIONS
description specifications
Length
of frame 218.44 cm (86.00 in.)
Height
to top of frame 58.42 cm (23.00 in.)
Width
of frame 73.66 cm (29.00 in.)
including cradle assembly 111.89 cm (44.05 in.)
including brake 96.52 cm (38.00 in.)
Track Assembly
Length 208.92 cm (82.25 in.)
Width 218.44 cm (86.00 in.)
Weight
224 dyno/crated dyno 1588 kg (3500 pounds)/ 1905.09 kg (4200 pounds)
Drum
diameter 60.96 cm (24.00 in.)
width 243.84 cm (96.00 in.)
Frame structural steel channel and angle
Maximum Horsepower 745.58 KW (1000 HP)
Maximum Speed 289.68 KPH (180 MPH)
Maximum Axle Weight 1361 kg (3000 pounds)
Remote Switches remote software control