Includes offset and center-set glazing) – EFCO 433 Series User Manual
Page 60
Advertising
June 2012
PART NO. Y017
Page 60 of 90
Series 433 Triple Set Installation Instructions
SECTION VII: Corners
(Includes Offset and Center-Set Glazing)
NOTE: Figure 26 can be
accommodated by using vertical
mullions from Figures 23, 24, and 25
in any combination.
[FIG. 25]
[FIG. 26]
[FIG. 28]
[FIG. 27]
NOTE: Figure 26 shows Inside and Outside
set verticals. You can create a multi-plane
configuration by using any of the vertical
mullions shown in figures 23, 24 and 25.
Advertising