EFCO 433 Series - Manual (Page 61)

June 2012 PART NO. Y017 Page 61 of 90
Series 433 Triple Set Installation Instructions
SECTION VII: Corners
(Includes Offset and Center-Set Glazing)
NOTE: Figure 30 can be
accommodated by using vertical
mullions from Figures 27, 28, and 29
in any combination.
NOTE: Figures 32 and 33 show the typical use
of corner mullions as inside corners. All glass
planes can be accommodated in both inside
and outside corners.
[FIG. 29] [FIG. 30]
[FIG. 31]
[FIG. 32] [FIG. 33]
NOTE: Figure 30 shows Inside
and Outside set verticals. You
can create a multi-plane
configuration by using any of
the vertical mullions shown in
figures 27, 28 and 29.